The Best Cyprus Community

Skip to content


Garage - Steves Autos

Sell and buy used things, look for a job etc.

Moderator: Piratis

Garage - Steves Autos

Postby specialict » Tue Jun 03, 2008 2:01 pm

Garage - Steves Autos
Tel : 99561094 - 24663909
(English, Greek, Russian, speaking)
* Servicing all makes of cars. Including All mechanical repairs.
* Full computer diagnosis. All A/C, and electrical work undertaken.
* Crash repairs - Restorations - Re sprays.
* Computerized, TIG and MIG welding.
* Fabrications and repairs in aluminum or stainless steel.
* Sandblasting facilities. {cleaning of rusty metals to look like new}
* Special engine builds - Tuning work / head porting etc.
* All our work is guaranteed. Open 24 hours 7 days a week.
* Very reliable and efficient breakdown service.
[ All your car needs in one stop, to our shop.]
specialict
New Member
New Member
 
Posts: 7
Joined: Mon May 07, 2007 11:08 am

Postby giorgos1410 » Tue Jun 03, 2008 11:06 pm

i need a frond bumper of the Mazda 323 1990-94 GTX!!can u help me?i can put u a foto if it will be helpful..thnx
User avatar
giorgos1410
New Member
New Member
 
Posts: 32
Joined: Fri May 16, 2008 10:41 pm

Postby mick&dolly » Tue Jun 10, 2008 9:54 pm

please could you tell me where your garage is located thanks MB & DOLLY
mick&dolly
Trial Member
Trial Member
 
Posts: 1
Joined: Sat Jan 19, 2008 8:05 pm
Location: blackburn/paralimni

Postby specialict » Wed Jul 16, 2008 2:27 pm

Sorry we didnt get back to you before.Our garage is located jn Dhekelia rd.about 5 min from the port roundabout.Heading towards Dhekelia,from the roundabout the second petrol station on your right is the ESSO petrol station,stop here and look across the road you will see the furniture shop FAVERO we are the YELLOW
building behind FAVERO - SPECIALIST ENGINEERS.Pleas drop in to see us anytime Thanks Steve.
specialict
New Member
New Member
 
Posts: 7
Joined: Mon May 07, 2007 11:08 am

Postby B&N SERVICES » Thu Jul 17, 2008 4:08 pm

I have a problem now... Hyundai Accent, 1997 year, was a problem with cooling fan as it was not switching on when the temperature went up. Anyway, engine boiled and now the head gasket is failed... Putting a lot of gas (and pressure) to cooling system and of course this cause again overheating... Need to do very soon as I have to open the cooling system every time the engine goes for some time on a higher rotation speed. Can You tell me please what would it be a cost of doing it? Plus checking where the signal from temp sensor is getting lost (maybe on the way to the computer, maybe on the way from computer to relay... Now I am switching fan manually every time I am starting the engine (switching on by crossing the right sticks in a relay fuse place).
B&N SERVICES
Member
Member
 
Posts: 69
Joined: Sat Dec 29, 2007 9:54 pm

Postby B&N SERVICES » Wed Jul 30, 2008 8:34 pm

Forgot to mention... Engine 1.5 liter, 12 valve
B&N SERVICES
Member
Member
 
Posts: 69
Joined: Sat Dec 29, 2007 9:54 pm

Postby specialict » Wed Aug 06, 2008 3:29 pm

B&N SERVICES. First to answer your question about the hyundai, in all probality the relay was the initial problem, this caused the car to over heat etc, now that the car has problems with the head gasket this will have to be sorted, there is no quick fix for this i am afraid? the temperature sensor is not working because it was damaged by the engine boiling over so this also needs replacing.- we can do all this work for you and very quickly get you back on the road.
specialict
New Member
New Member
 
Posts: 7
Joined: Mon May 07, 2007 11:08 am

Postby specialict » Wed Aug 06, 2008 3:29 pm

B&N SERVICES. First to answer your question about the hyundai, in all probality the relay was the initial problem, this caused the car to over heat etc, now that the car has problems with the head gasket this will have to be sorted, there is no quick fix for this i am afraid? the temperature sensor is not working because it was damaged by the engine boiling over so this also needs replacing.- we can do all this work for you and very quickly get you back on the road.
specialict
New Member
New Member
 
Posts: 7
Joined: Mon May 07, 2007 11:08 am

Postby specialict » Wed Aug 06, 2008 3:33 pm

giorgos1410 . for your bumper problem the answer is yes i can supply you with a bumper for your Mazda 323 1990-94 year model GTX. please contact or drop in to see us, thanks. steve.
specialict
New Member
New Member
 
Posts: 7
Joined: Mon May 07, 2007 11:08 am


Return to Classifieds

Who is online

Users browsing this forum: No registered users and 1 guest